for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com mixers - single & double balanced - smt 10 10 - 1 HMC220AMS8 / 220ams8e v 0 0.0 211 general description features functional diagram ultra small package: msop8 conversion loss: 8.5 db wideband if: dc - 4 ghz electrical specifcations, t a = +25 c, as a function of lo drive typical applications the HMC220AMS8 / HMC220AMS8e is ideal for: ? microwave radios ? vsat the HMC220AMS8 & HMC220AMS8e are ultra minia - ture double-balanced mixers in 8 lead plastic surface mount packages (msop). this passive mmic mixer is constructed of gaas schottky diodes and novel planar transformer baluns on the chip. the device can be used as an upconverter, downconverter, bi-phase (de)modulator, or phase comparator. the consistent mmic performance will improve system operation and assure regulatory compliance. gaas mmic smt double- balanced mixer, 5 - 12 ghz parameter lo = +13 dbm if = 100 mhz lo = +13 dbm if = 100 mhz lo = +10 dbm if = 100 mhz units min. typ. max. min. typ. max. min. typ. max. frequency range, rf & lo 5 - 10 10 - 12 5.9 - 10 ghz frequency range, if dc - 4 dc - 4 dc - 3.5 ghz conversion loss 7.0 10 8.5 10.5 7. 5 10 db noise figure (ssb) 7.0 10 8.5 10.5 7. 5 10 db lo to rf isolation 17 25 13 18 17 25 db lo to if isolation 20 28 14 20 20 28 db ip3 (input) 14 17 16 21 13 16 dbm 1 db gain compression (input) 4 8 4 8 5 8 dbm
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com mixers - single & double balanced - smt 10 10 - 2 conversion gain vs temperature @ lo = +10 dbm isolation @ lo = +10 dbm conversion gain vs. lo drive return loss @ lo = +10 dbm if bandwidth vs lo drive conversion gain and return loss p1db vs. temperature lo = +10 dbm HMC220AMS8 / 220ams8e v 0 0.0 211 gaas mmic smt double- balanced mixer, 5 - 12 ghz -20 -15 -10 -5 0 5 6 7 8 9 10 11 12 13 -40 c +25 c +85 c conversion gain (db) frequency (ghz) 0 4 8 12 16 5 6 7 8 9 10 11 12 13 -40 c +25 c +85 c p1db (dbm) frequency (ghz) -25 -20 -15 -10 -5 0 5 6 7 8 9 10 11 12 13 lo rf return loss (db) frequency (ghz) -20 -15 -10 -5 0 5 6 7 8 9 10 11 12 13 +5 dbm +7 dbm +9 dbm +10 dbm +13 dbm conversion gain (db) frequency (ghz) -25 -20 -15 -10 -5 0 0123456 if conversion gain (db) return loss (db) if frequency (ghz) +13 dbm +10 dbm conversion gain if return loss +13 dbm +10 dbm -35 -30 -25 -20 -15 -10 -5 0 5 6 7 8 9 10 11 12 13 rf/if lo/if lo/rf isolation (db) frequency (ghz)
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com mixers - single & double balanced - smt 10 10 - 3 input ip3 vs. temperature @ lo = +10 dbm input ip2 vs. temperature @ lo = +10 dbm input ip3 vs. lo drive input ip2 vs. lo drive HMC220AMS8 / 220ams8e v 0 0.0 211 gaas mmic smt double- balanced mixer, 5 - 12 ghz 10 15 20 25 30 5 6 7 8 9 10 11 12 13 +7 dbm +10 dbm +13 dbm input ip3 (dbm) lo frequency (ghz) 20 25 30 35 40 45 50 5 6 7 8 9 10 11 12 13 -40 c +25 c +85 c input ip2 (dbm) lo frequency (ghz) 0 10 20 30 40 50 5 6 7 8 9 10 11 12 13 +7 dbm +10 dbm +13 dbm input ip2 (dbm) lo frequency (ghz) 10 15 20 25 30 5 6 7 8 9 10 11 12 13 -40 c +25 c +85 c input ip3 (dbm) lo frequency (ghz)
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com mixers - single & double balanced - smt 10 10 - 4 absolute maximum ratings rf / if input +13 dbm lo drive +27 dbm storage temperature -65 to +150 c operating temperature -40 to +85 c esd sensitivity (hbm) class 1a electrostatic sensitive device observe handling precautions HMC220AMS8 / 220ams8e v 0 0.0 211 gaas mmic smt double- balanced mixer, 5 - 12 ghz mxn spurious outputs harmonics of lo nlo mrf 0 1 2 3 4 0 xx 3 10 7 54 1 11 0 28 31 35 2 53 62 53 58 61 3 73 69 74 66 73 4 > 85 > 85 > 85 > 85 > 85 rf = 7.5 ghz @ -10 dbm lo = 7.6 ghz @ +10 dbm all values in dbc below the if power level (-1rf + 1lo) lo freq. (ghz) nlo spur at rf port 1 2 3 4 5.5 29 30 42 69 7 29 27 28 66 8.5 26 35 47 70 10 22 40 44 67 11. 5 18 49 51 66 13 13 63 62 xx lo = +10 dbm values in dbc below input lo level measured at the rf port.
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com mixers - single & double balanced - smt 10 10 - 5 HMC220AMS8 / 220ams8e v 0 0.0 211 gaas mmic smt double- balanced mixer, 5 - 12 ghz outline drawing notes: 1. leadframe material: copper alloy 2. dimensions are in inches [millimeters] 3. dimension does not include moldflash of 0.15mm per side. 4. dimension does not include moldflash of 0.25mm per side. 5. all ground leads must be soldered to pcb rf ground. part number package body material lead finish msl rating package marking [3] HMC220AMS8 low stress injection molded plastic sn/pb solder msl1 [1] h220a xxxx HMC220AMS8e rohs-compliant low stress injection molded plastic 100% matte sn msl1 [2] h220a xxxx [1] max peak refow temperature of 235 c [2] max peak refow temperature of 260 c [3] 4-digit lot number xxxx package information
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com mixers - single & double balanced - smt 10 10 - 6 HMC220AMS8 / 220ams8e v 0 0.0 211 gaas mmic smt double- balanced mixer, 5 - 12 ghz evaluation circuit board item description j1 - j3 pcb mount sma rf connector u1 HMC220AMS8 / HMC220AMS8e mixer pcb [2] 101828 evaluation board [1] reference this number when ordering complete evaluation pcb [2] circuit board material: rogers 4350 the circuit board used in the application should use rf circuit design techniques. signal lines should have 50 ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. a sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation circuit board shown is available from hittite upon request. list of materials for evaluation pcb 101830 [1]
|
